How to Make a Horizontal Carry Knife Sheath in Kydex

If you’re looking for a durable and reliable way to carry your knife, then a horizontal carry sheath is the way to go. Kydex is a great material for making sheaths, as it’s tough and resists wear and tear. Here’s how to make a horizontal carry knife sheath in Kydex.

First, you’ll need to measure the blade of your knife and cut a piece of Kydex to size. Then, mark out the shape of the sheath on the Kydex with a pencil or pen. Next, use a heat gun or stovetop burner to carefully heat up the Kydex so that it’s pliable.

Be careful not to overheat it, as this can damage the material. Once the Kydex is heated, mold it around the blade of your knife until it takes on the desired shape. Once you’re happy with the shape, allow the Kydex to cool and harden before trimming away any excess material.

Now all that’s left to do is add any embellishments or finishes that you want, such as rivets or stitching. And there you have it – your very own custom-made horizontal carry knife sheath!

  • Start with a piece of Kydex that is long enough to wrap around the knife handle and extend past the blade by at least 2 inches
  • Cut a slit down the center of the Kydex, being careful not to cut too close to the edges
  • Wrap the Kydex around the knife handle, making sure that the blade is completely covered
  • Use a heat gun or other heat source to carefully melt the edges of the Kydex together, sealing them in place
  • Allow the Kydex to cool and then trim away any excess material

Knife Sheath Belt Loop Attachment

Most knife sheaths come with a belt loop attachment of some kind. This is usually a simple leather strap or a plastic clip that allows you to secure the sheath to your belt. While this is a very convenient way to carry your knife, it does have some drawbacks.

The biggest problem with carrying your knife in a sheath attached to your belt is that it can be uncomfortable. The sheath can rub against your hip or thigh and become irritating, especially if you are wearing light clothing. Additionally, the weight of the knife can pull on your pants and cause them to sag.

Another issue with carrying a knife in a sheath attached to your belt is that it is not always the most secure option. If you are doing any physical activity where you could potentially fall, there is a chance that the knife could become dislodged from the sheath and cause injury. For this reason, many people prefer to carry their knives in a pouch or other type of container that they can attach to their belts.

If you do decide to carry your knife in a sheath attached to your belt, there are a few things you can do to make it more comfortable and secure. First, make sure that the sheath fits snugly against your body so that it doesn’t move around too much when you walk or run. Second, consider using a retention strap or locking mechanism to keep the knife securely in place.

And finally, choose a high-quality belt loop attachment that won’t break easily if you do happen to fall with your knife attached.

Kydex Sheath Mounting

Assuming you would like a blog post discussing how to mount a kydex sheath: If you’re unfamiliar with the term, Kydex is a brand name of thermoplastic sheet used to make molded sheaths for knives and other tools. It’s durable and holds its shape well, making it ideal for knife sheaths.

In this tutorial, we’ll show you how to mount a kydex sheath using basic household materials. You’ll need: -A piece of kydex large enough to cover your knife blade (plus some extra)

-A sharp utility knife or box cutter -A straight edge (ruler or yardstick) -An oven set to 200 degrees Fahrenheit

-Oven mitts or gloves First, trace your knife blade onto the kydex. Then, using your straight edge and utility knife, cut out the shape of the blade from the kydex.

Make sure to leave about 1/4″ of material all around the blade so that it will be entirely covered when inserted into the sheath. Next, preheat your oven to 200 degrees Fahrenheit. Once it has reached that temperature, carefully place the kydex sheet on an oven-safe surface inside (we recommend using an old cookie sheet lined with foil).

Allow it to remain in there for 3-5 minutes until it becomes soft and pliable. While wearing oven mitts or gloves, take the softened kydex out of the oven and quickly drape it over your knife blade so that it takes on the shape of the blade. Be careful not to burn yourself!

Press down on any areas where there are wrinkles or bubbles so that they smooth out. If necessary, put it back in the oven for a minute or two until it’s soft enough to manipulate again. Finally, allow the kydEXto cool completely before removing it fromthe knife blade . Once cooled ,it will hold its new shape . Trim off any excess material with scissors ,and voila! You’ve now got a custom -fitk ydexe ssheathforyour tool .

Kydex Knife Sheath Belt Loop

A kydex knife sheath belt loop is a type of belt loop that is made from kydex material. This type of belt loop is often used on knives because it provides a more secure grip than other types of loops. The kydex material also helps to protect the knife from damage and wear.

J Hook Knife Sheath

A J hook knife sheath is a type of knife sheath that is designed to be worn on the belt. This type of sheath has a J shaped hook that allows the user to easily attach and detach the sheath from their belt. The J hook also provides extra security by keeping the sheath in place while you are wearing it.

There are many benefits to using a J hook knife sheath. First, it is much easier to attach and detach than a traditional belt loop sheath. Second, the J hook provides extra security so you don’t have to worry about your knife falling out while you are wearing it.

Third, this type of sheath protects your clothing from getting cut by the knife blade. If you are looking for a new knife sheath, then consider a J hook knife sheath. This type of sheath is easy to use, secure, and durable.

How to Make a Kydex Sheath

Kydex is a great material for knife sheaths because it is durable and easy to work with. You can make a basic Kydex sheath in just a few steps. First, you will need to trace the outline of your knife onto a piece of Kydex.

Then, use a utility knife or jigsaw to cut out the shape. Next, you will need to heat the Kydex so that it is pliable. You can do this with a heat gun or by submerging it in hot water.

Once the Kydex is heated, wrap it around your knife and secure it in place with clamps or tape. Allow the Kydex to cool and then trim off any excess material. Finally, use some sandpaper to smooth out the edges of your new sheath.

How to Make a Horizontal Carry Knife Sheath in Kydex

Credit: www.nothingbutknives.com

How Thick Should Kydex Be for a Knife Sheath?

Assuming you are referring to a custom Kydex sheath for a knife, thickness can vary depending on the application. For example, if the sheath will see heavy use or will be exposed to extreme elements, a thicker Kydex material (5-7 oz.) may be used for added durability. If the sheath will not see heavy use and will primarily be used for looks/style, a thinner Kydex material (2-3 oz.) can be used.

Can You Make Kydex Sheath?

Kydex is a thermoplastic material that can be molded into various shapes and sizes. It is often used to create custom knife sheaths, as it can be formed around the blade of the knife for a snug fit. Kydex sheaths are durable and offer good protection for the blade, making them a popular choice among knife enthusiasts.

Making a Kydex sheath is not as difficult as one might think. With a few simple tools and some patience, anyone can create a custom sheath for their favorite knife. The first step is to trace the outline of the knife onto a piece of Kydex.

Then, using a heat gun or other source of heat, carefully heat up the Kydex until it is soft enough to mold around the blade. Once the Kydex has cooled and hardened, it can then be trimmed to size and finished as desired. With a little practice, anyone can make their own custom Kydex sheath.

This method allows for complete customization of both the fit and appearance of the sheath, making it possible to create a truly unique product that will protect your prized possession for years to come.

What is Scout Carry?

Scout carry, also known as the fireman’s carry, is a method of carrying an unconscious or injured person over your shoulder. The person being carried is typically placed in a sitting position with their legs dangling over your shoulder, and their arms are wrapped around your neck. The scout carry is an effective way to transport someone who is unable to walk on their own, and it can be used in a variety of situations – from rescuing someone from a burning building to carrying an injured hiker down a trail.

It’s important to remember that the person being carried will be completely reliant on you, so it’s crucial that you’re able to maintain balance and keep them secure.

Does Kydex Dull Knives?

Kydex is a thermoplastic material that is often used in knife sheaths and holster making. It is durable and easy to work with, but many people wonder if it dulls knives. The answer is yes, Kydex can dull knives over time.

However, this doesn’t happen right away and it takes quite a bit of use for the Kydex to start affecting the blade. If you are concerned about your knives getting dull from using a Kydex sheath, you can take some steps to prevent it. First, make sure that the Kydex sheath is not too tight.

A snug fit is fine, but if the sheath is too tight, it will put more pressure on the blade and cause it to dull faster. Second, avoid putting your knife in and out of the sheath too often. Every time you do this, you create friction which can lead to premature dulling.

Finally, consider investing in a good quality knife sharpener so that you can keep your blades sharp regardless of how much use they see.

Making A Sheath | Multi Layered Kydex Sheath | Horizontal Carry

Conclusion

Horizontal carry knife sheaths are a great way to keep your knife within easy reach. They are also relatively easy to make, provided you have the right materials. Kydex is a versatile material that can be molded and shaped to fit nearly any blade, making it an ideal material for custom knife sheaths.

In this article, we will show you how to make a horizontal carry knife sheath in kydex.

Leave a Comment

Your email address will not be published.

Scroll to Top